Like all DHS-series C Frame High-Speed Power Press uses a welded steel frame, 3 point guide fabricated slide runs on linear bearings with oversized steel bolsters, this enables the press to deliver & ensure longer tool life and higher component accuracy.
High-speed Plunger Guided C-type Press
Precision Main Shaft
Drive shaft of EN19 carbon-alloy steel forged shaft, ultrasonically tested, random tested for metallurgical properties, ground at bearing surface and dynamically balanced for high speed presses.
Frame
Frame is computer aided design aimed at economy and rigidity, welded steel construction, for maximum rigidity and long accuracy.
Frame is Dynamically Designer to ensure minimum deflection and thus improve die and machine life.
Minimum Vibration
Outstanding dynamic balancing design reduces vibration and noise to a minimum.
Forced Lubrication System
Installed forced lubrication system to minimize thermal strain of machine frame, upgrade stamping quality and extend service life of the machine.
Slide Design
Manufactued from high graded 2062 prime steel & stress relieved for maximum rigidity and long term accuracy. It comes with Single Post Guide
STANDARD ACCESSORIES :
•PLC Controlled Electric control panel
•Variable Speed with VFD motor
•HMI Fault Finding Display
•Two-Hand Box
•Foot Switch
•Shut Height Indicator
•Crank Angle Indicator
•Digital Pressure Sensor
•Forced Lubrication
•SANDSUN Hydraulic thread lock system
•Hand safety area sensors
OPTIONAL ACCESSORIES:
•De-coiler(Single/Double).
•Straightener
•Feeder
•Coiler
•Hydraulic Jam Release
•Die Area Light
•Miss Feed Detection Sensors
MODEL | Units | DHS-CP-16 | DHS-CP-25 | DHS-CP-45 | DHS-CP-63 |
CAPACITY | TON | 16 | 25 | 45 | 63 |
STROKE | mm | 30 | 30 | 30 | 30 |
SPEED | mm | 200 ~ 600 | 200 ~ 600 | 200 ~ 500 | 200 ~ 450 |
Die-Height | mm | 195 ~ 210 | 200 ~ 220 | 210 ~ 230 | 230 ~ 260 |
Bolster Area | mm | 600 * 300 | 600 * 300 | 700 * 400 | 900 * 500 |
Bolster Thickness | mm | 70 | 80 | 90 | 100 |
Slide Area | mm | 350 * 220 | 400 * 220 | 400 * 300 | 540 *340 |
Bolster Opening | mm | 250 * 100 | 250 * 100 | 400 * 100 | 500 * 100 |
Main Motor | HP | 5 | 5 | 7.5 | 15 |
Weight | Kg | 2400 | 3400 | 4500 | 8000 |
Plunger No | No. | 1 | 1 | 1 | 1 |
Clutch Brake | Type | Combination | Combination | Combination | Combination |
High-speed Plunger Guided H-type Press
Like all DHS-series H FRAME HIGH SPEED POWER PRESS uses a welded steel frame, MS fabricated slide, and over–sized steel bolsters. This enables the press to deliver & ensuring longer die life and higher part quality.
Frame
Manufactued from high graded 2062 prime steel & stress relieved for maximum rigidity and long term accuracy.
The frame structure is designed by means of “Computerized finite element analysis”. It provides optimum design for frame strength and strain.
Precision Main Shaft
The driveshaft is made from EN19 forged high-speed carbon-alloy steel, ultrasonically tested, randomly tested for metallurgical properties, the ground at bearing surface and dynamically balanced for high-speed presses.
Slide Design
Manufactued from high graded 2062 prime steel & stress relieved for maximum rigidity and long term accuracy.
It comes with two variants
1.Single Post Guide
2.Double Post Guide
Minimum Vibration
Outstanding dynamic balancing design reduces vibration and noise to a minimum.
Forced Lubrication System
Installed forced lubrication system to minimize thermal strain of machine frame, upgrade stamping quality and extend service life of the machine.
STANDARD ACCESSORIES :
•PLC Controlled Electric control panel
•Variable Speed with VFD motor
•HMI Fault Finding Display
•Two-Hand Box
•Foot Switch
•Shut Height Indicator
•Crank Angle Indicator
•Digital Pressure Sensor
•Forced Lubrication
•SANDSUN Hydraulic thread lock system
•Hand safety area sensors
OPTIONAL ACCESSORIES:
•De-coiler(Single/Double).
•Straightener
•Feeder
•Coiler
•Hydraulic Jam Release
•Die Area Light
•Miss Feed Detection Sensors
MODEL | Units | DHS-HP-25 | DHS-HP-45 | DHS-HP-63 | DHS-HP-80 | DHS-HP-125 |
CAPACITY | TON | 25 | 45 | 63 | 80 | 125 |
STROKE | mm | 30 | 30 | 30 | 30 | 30 |
SPEED | mm | 200 ~ 600 | 200 ~ 550 | 200 ~ 500 | 200 ~ 400 | 200 ~ 400 |
Die-Height | mm | 220 ~ 250 | 260 ~ 290 | 300 ~ 330 | 310 ~ 350 | 320 ~ 360 |
Bolster Area | mm | 500 * 400 | 740 * 550 | 900 * 600 | 1100 * 700 | 1300 * 800 |
Bolster Thickness | mm | 80 | 90 | 100 | 125 | 160 |
Slide Area | mm | 450 * 350 | 690 * 380 | 800 * 440 | 1000 * 460 | 1200 * 550 |
Bolster Opening | mm | 350 * 100 | 450 * 120 | 500 * 130 | 700 * 130 | 800 * 200 |
Window Width | mm | 200 | 200 | 250 | 300 | 350 |
Main Motor | HP | 5 | 15 | 20 | 30 | 40 |
Weight | Kg | 4500 | 7000 | 9500 | 13000 | 19000 |
Plunger No | No. | 1 | 2 | 2 | 2 | 2 |
Clutch Brake | Type | Combination | Combination | Combination | Combination | Combination |