DMP-C Series mechanical Power presses are manufactured from 20 ton to 150-ton capacity using duly tested components and developed with rigid configurations.
Mechanical Powerpress C Frame
Frame
• The frame is fabricated with MIG WELDING to release the stress increase the lifespan of the frame.
Bushes
• Every Bush on the machine is made out of phosphorous bronze specially grooved for lubrication.
Drive Shaft
• Drive Shaft is made of carbon alloy steel (EN9) for a long life and better efficiency
Connecting Rod
• Two piece connecting rod helps in easy maintenance.
• In the future, you do not need to dismantle the complete machine to repair the connecting rod.
Back Shaft
• Back-shaft is installed on CI casted housing & then bolted on the body to share the load of the shaft.
Standard Accessories
• Slide adj. Spanner
• Front Gaurd
• Fly wheel & Gear Guard
• Knock Out system
Optional Accessories
- • Two Hand Pneumatic Safety System
- • Automatic Manual Lubrication Pump
- • Extra Ram Base Plate
- • De-Coiler
- • Counter Meter
- • Inclinable Type
- • Single Hand Mechanical Safety System
- • Electric Motor, Starter and Vee-Belts & Pulley.
- • Electric Bolster
- • Feeder/ Gripper
- • Electrical Panel
- • Die Cushion
Capacity in tons | Units | 20 Ton | 30 Ton | 50 Ton | 75 Ton | 100 Ton | 150 Ton |
Bolster Size | mm | 660 * 355 | 710 * 405 | 760 * 505 | 860 * 560 | 1000 * 630 | 1100 * 670 |
Bolster . | mm | 75 | 75 | 90 | 90 | 100 | 125 |
Bolster Opening | mm | 125 | 130 | 150 | 175 | 200 | 250 |
Shank Hole | mm | 30 | 40 | 40 | 50 | 60 | 60 |
Stroke Legnth Variable | mm | 76 | 90 | 102 | 114 | 126 | 152 |
Shaft Dia | mm | 86 | 95 | 107 | 133 | 159 | 184 |
Rating Point | mm | 2.5 | 2.5 | 3 | 3 | 4 | 4 |
Shut Height | mm | 275 | 300 | 320 | 330 | 350 | 400 |
Gear Dia | mm | 610 | 660 | 710 | 760 | 865 | 915 |
Fly Wheel Dia | mm | 660 | 710 | 830 | 915 | 1070 | 1210 |
Strokes per minute | SPM | 70 | 65 | 60 | 55 | 50 | 40 |
Slide adjustment | mm | 25 | 30 | 35 | 40 | 50 | 50 |
Floor to top of bed | mm | 820 | 820 | 820 | 850 | 850 | 900 |
Height of Machine | mm | 2250 | 2400 | 2750 | 3000 | 3200 | 3550 |
Area (LxW) | mm | 900 * 1000 | 1000 * 1100 | 1150 * 1250 | 1250 * 1350 | 1500 * 1600 | 1650 * 1700 |
Motor Power required | Hp / RPM | 3 / 1440 | 3 / 1440 | 5 / 1440 | 7.5 / 1440 | 10 / 1440 | 15 / 1440 |
Frame Plate Thickness | mm | 28 | 32 | 32 | 38 | 40 | 40 |
Net Weight | kg | 1450 | 2000 | 3000 | 4000 | 5500 | 7600 |